-
KappAnt - 1/16" X 10 ft Tube$19.505% Antimony Lead-free solder for Copper & Brass. 452- 464°F (234 - 240°C) with moderate strength, poor conductivity - Solid .062" (1.6mm) diameter x 10 ft in tube. VIEW PRODUCT -
KappAnt - 1/8" X 1/2 lb spool$24.505% Antimony Lead-free solder for Copper & Brass. 452- 464°F (234 - 240°C) with moderate strength, poor conductivity - Solid .125" (3.2mm) diameter x 1/2 lb spool. VIEW PRODUCT -
KappAnt - 1/16" X 1 lb spool$34.505% Antimony Lead-free solder for Copper & Brass. 452- 464°F (234 - 240°C) with moderate strength, poor conductivity - Solid .062" (1.6mm) diameter x 1 lb spool. VIEW PRODUCT -
KappAnt - 1/16" X 1/2 lb spool$24.505% Antimony Lead-free solder for Copper & Brass. 452- 464°F (234 - 240°C) with moderate strength, poor conductivity - Solid .062" (1.6mm) diameter x 1/2 lb spool. VIEW PRODUCT -
KappAnt - 1/8" X 1 lb spool$34.505% Antimony Lead-free solder for Copper & Brass. 452- 464°F (234 - 240°C) with moderate strength, poor conductivity - Solid .125" (3.2mm) diameter x 1 lb spool. VIEW PRODUCT
Tin-Antimony Solder
KappAnt™ Tin-Antimony solder is an NSF compliant Lead-free replacement for Tin-Lead solder in electrical equipment, Copper tubing, and cooling coils for refrigerators. Joints are of moderate strength where the higher strength and higher cost of KappFree™ or KappZapp™ Tin-Silver solders are not necessary. KappAnt’s higher Tin content provides higher electrical conductivity than a high Lead solder in electrical/electronic joints. Also used where Lead may be a hazard - for instance, in contact with foodstuffs or potable water pipes. KappAnt™ solder is suitable for use at higher temperatures than KappLead™ solders.
Specification: ASTM B32, Grade 95TA.
This product complies with NSF/ANSI Standard 372: Drinking Water System Components – Lead Content. Product also Certified to NSF/ANSI 61, Annex G and conforms with Lead content requirements for “Lead-free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act in effect as of January 4, 2014. Weighted average lead content < 0.25%; Solder and flux lead content < 0.20%. This alloy complies with the European RoHS and REACH directives. No lead, cadmium or mercury used in production.
Applications
- Plumbing applications when joining Copper, Brass, or Stainless Steel
- Hot water lines on Copper pipe, aerosol cans, and sap buckets
- Joints that are of moderate strength where the higher strength and higher cost of KappFree™ or KappZapp™ Tin-Silver solders are not necessary
- Used where Lead may be a hazard - in contact with foodstuffs or potable water pipes. NSF compliant.
- KappAnt™ solders containing 5% Antimony (Sb) are suitable for use at higher temperatures than Tin-Lead solders
- Paired with Kapp Comet™ Flux
Benefits & Features
- Higher Tin content provides higher electrical conductivity than a high Lead solder in electrical/electronic joints
- It is a low cost alternative to higher priced Silver solders
- Its wide workable range allows for joint adjustment during soldering
Properties
|
Composition |
|
|
Sn (Tin): |
95% |
|
Sb (Antimony): |
5% |
|
|
|
|
Technical Data |
|
|
Melting Range: |
452-464°F (234-240°C) |
|
Tensile Strength: |
5,900 psi |
|
Shear Strength: |
6,000 psi |
|
Elongation: |
2% |
|
Electrical Conductivity: |
11.9 (%IACS) |
Product Variants
KappAnt™ is available in standard forms:
- 1/32” (0.031”) (0.8mm)
- 1/16” (0.063”) (1.6mm)
- 1/8” (0.125”) (3.2mm)
Custom alloys and forms are our specialty. Call a Kapp representative to discuss what size and diameter are right for you.
Matching Flux