- Kapp "HotDam" Damming Compound -10lb$295.00
Kapp HotDam™ Compound is a damming, molding, and positioning putty for pouring Babbitt/solder alloys, suppressing vibration, holding solder in place, or holding other delicate parts for brazing/welding. 10 lb container.
VIEW PRODUCT - Kapp "HotDam" Damming Compound -1lb$34.50
Kapp HotDam™ Compound is a damming, molding, and positioning putty for pouring Babbitt/solder alloys, suppressing vibration, holding solder in place, or holding other delicate parts for brazing/welding. 1lb container.
VIEW PRODUCT
Description
Kapp HotDam™ Compound is a Damming, Molding, and positioning Putty.
Applications
- Damming compound for pouring Babbitt bearings and various molten solder alloys.
- Positions delicate parts for soldering, brazing and welding
- Holds solder while soldering wires on motors and generators
- Also used for vibration suppression
Properties
Technical Data |
|
Appearance: |
Dark Gray Putty |
Odor: |
Slight |
Flash Point: |
Over 540°F using Cleveland Open Cup |
%Volatile: |
0% |
Shelf Life |
2 years |
Product Variants
- 1lb. (0.5 kg) plastic jars
- 10 lb. (4.5 kg) plastic tubs
Storage
Keep container lid tightly closed when not in use. Store in a cool, dry place away from heat. Shelf life of this product is 2 years if container is unopened.
Safety
Kapp HotDam™ Compound in its purchased form does not present an inhalation hazard from fibers or dust, as it is a putty-like compound. Fibers and dust are not airborne under normal handling. Upon heating it will generate decomposition and reaction vapors. These vapors should be adequately exhausted during heating. Consult SDS for additional safety information.