- DURAKAPP™#15 BABBITT - 1 LB. REGULAR BAR$16.50
ASTM B23 #15 - OEM refurbishment LEAD Babbitt for low speed machinery, engines, and generators. 1Sn/83Pb/16Sb, nominal 1 lb. bars.
VIEW PRODUCT - DURAKAPP™#15 BABBITT - 5 LB. NOTCH BAR$59.50
ASTM B23 #15 - OEM refurbishment LEAD Babbitt for low speed machinery, engines, and generators. 1Sn/83Pb/16Sb, 5 lb. notch bars.
VIEW PRODUCT - DURAKAPP™#15 BABBITT - 35 LB. INGOT$380.80
**Minimum order quantity 350 lbs.** ASTM B23 #15 - OEM refurbishment LEAD Babbitt for low speed machinery, engines, and generators. 1Sn/83Pb/16Sb, nominal 35 lb. ingots.
VIEW PRODUCT
ASTM-B23 Grade 15 Lead Babbitt
DuraKapp™#15 Babbitt is a general purpose, low speed, Lead-based Babbitt with good tensile and compression strengths under shock and load with little lubrication. Kapp Alloy’s unique Precision Microcasting™ process, combined with high purity virgin raw materials, results in the world’s strongest, most ductile Lead-based Babbitt.
DuraKapp™#15 Babbitt meets or exceeds the specifications for ASTM #15 Babbitt —also known as Durite, Grade 15, or QQ-T-390A No. 10 Babbitt. We back all of our products with a 100% satisfaction guarantee or your money back.
Applications
- Slower speed, heavy load and pressure settings in small or large bearings
- Especially useful in older equipment to conform to small consistent imperfections in shafts and shells
- Refurbishing Grade 15 bearings in heavy load and pressure applications in low speed shafts and drives
- Found in drives and equipment with little lubrication or maintenance
- Older slower speed shafts, drives, motors, and engines
- Found in material handling and mixing equipment – pulverizers, mixers, screeners, grinders, and woodworking machinery (saw mills, tables, and shapers)
- Paired with KappaTinning™ Compound and Kapp CopperBond™ Flux
Properties
Grade 15 Babbitt Alloy Specification |
|
ASTM B23: |
Grade 15 |
QQ-T-90A: |
No. 10 |
|
|
Composition |
|
Sn (Tin): |
0.8-1.2% |
Sb (Antimony): |
14.5-17.5% |
Pb (Lead): |
Balance |
|
|
Technical Data |
|
Melting Temperature Range: |
478-538°F (248-281°C) |
Pouring Temperature: |
662°F (350°C) |
Brinell Hardness @ 68°F (20°C): |
21.0 |
Tensile Strength (Chill Cast): |
10,300 psi (71 MPa) |
Density: |
10 g/cm3 (650 lb/ft3) |
Elastic (Young’s, Tensile) Modulus: |
23 GPa (3.3 x 106 psi) |
Poisson’s Ratio: |
0.4 |
Specific Heat Capacity: |
140 J/kg-K (0.035 BTU/lb-°F) |
Thermal Expansion: |
26 µm/m-K |
Grade 15 Lead Babbitt Product Variants
DuraKapp™#15 is available in standard forms:
- 35 lb. (15.9 kg) ingots
- 5 lb. (2.3 kg) notch bars
- 1 lb. (0.5 kg) bars
Custom alloys and forms are our specialty. Call Kapp Alloy with your specific project!
Also Order
Click here for DuraKapp™ #15 Technical Data Sheet