-
Kapp Golden Flux Paste 3 oz Jar$19.50Paste Low temperature 350-550°F / 177-288°C flux for Aluminum - 3 oz jar VIEW PRODUCT -
Kapp Golden Flux Paste 8 oz Jar$29.50Paste Low temperature 350-550°F / 177-288°C flux for Aluminum - 8 oz jar VIEW PRODUCT
Kapp Golden™ Flux Paste has been designed specifically for low temperature soldering of Aluminum to Aluminum, Copper, and Stainless Steel. Unlike liquid flux, paste stays where you apply it to minimize clean-up. Effective fluxing action occurs at 350-550°F (177-288°C). Kapp Golden™ Flux Paste will char at temperatures above 550°F (288°C).
Applications
- Aluminum to Aluminum or Aluminum to Copper wire pigtail splices
- Aluminum to Copper, Aluminum to Brass or plated terminals
- Hot dip coating of Aluminum cable connectors to provide a low resistance contact surface
- Recommended soldering alloys:
- KappAloy9™ and KappAloy15™ solders for soft soldering
- Kapp 509™ - Cadmium-Zinc solders
- KappRad™ - Tin-Zinc-Cadmium solders
- Kapp GalvRepair™ - Tin-Zinc-Lead solders
- Where it is desirable to attain flow into tight capillary joints use Kapp Liquid Golden Flux™
- Residue is electrically conductive and slightly corrosive. We recommend that user remove any residue with hot water or alcohol and a clean rag.
Properties
|
Technical Data |
|
|
Active Temperature Range: |
350-550°F (177-288°C) |
|
Viscosity: |
1050 cps #3 spindle, 20 rpm |
|
Appearance: |
Gold-colored paste with ammonia odor |
|
Solubility: |
Soluble in water |
|
pH: |
Slightly Alkaline |
|
Corrosion Resistance: |
Fair |
|
Boiling Point: |
273°F (134°C) |
|
Flash Point: |
230°F (110°C) |
|
Weight Per Gallon: |
10 lb. (4.5 kg) |
|
Shelf Life: |
2 years unopened at ambient temp. |
|
Packaging: |
3 and 8 oz. jars |
|
*Note: Flux is rated by D.O.T. as a Corrosive Hazard - Can Not be shipped by Air |
|
Product Variants
- 3 oz. jar
- 8 oz. jar
Click here for Kapp Golden™ Flux Paste Technical Data Sheet
Click here for Kapp Golden™ Flux Paste Safety Data Sheetx