Flux for Aluminum
Flux for Aluminum VIEW PRODUCTS
Flux for Copper, Brass, Stainless & Non-Aluminum
Flux for Copper, Brass, Stainless & Non-Aluminum VIEW PRODUCTS

Kapp Soldering Fluxes

 

Kapp Alloy and Wire, Inc. supplies flux for the removal of oxides and other contaminants from your parts to allow a strong consistent molecular bond between the solder and parts. These fluxes fall into two categories – fluxes for soldering to Aluminum, and fluxes for soldering to Brass, Copper, and Stainless Steel. The fluxes are further segregated to work with low-temperature solders below 550°F (288°C) and with high-temperature solders above 550°F (288°C).

 

Fluxes for Soldering Aluminum

 

Kapp Golden™ Flux: 350-550°F (177-288°C)

Kapp Golden™ Flux is designed specifically for the low temperature soldering of Aluminum to Aluminum, Copper, and Stainless Steel with an active temperature range of 350-550°F (177-288°C). It is available in both liquid and paste forms to fit your soldering needs.

 

Kapp Lunar™ Flux Paste: 550-800°F (288-427°C)

Kapp Lunar™ Flux is designed for the high temperature soldering of all common Aluminum and Zinc Diecast alloys with an active temperature range of 550-800°F (288-427°C). It is formulated to work specifically with Kapp Alumite™ solder. The paste stays where it is applied to simplify the soldering process.

Fluxes for Soldering Metals Other Than Aluminum

 

Kapp Comet™ Flux: 350-550°F (177-288°C)

Kapp Comet™ Flux is a liquid flux designed for the low temperature soldering of all common metals except Aluminum with an active temperature range of 350-550F° (177-288°C). It is highly recommended for use with KappZapp™ Silver solder on Stainless Steel.

 

Kapp CopperBond™ Flux: 550-800°F (288-427°C)

Kapp CopperBond™ Flux is a liquid flux designed for the high temperature soldering of all common metals except Aluminum with an active temperature range of 550-800°F (288-427°C). This flux is excellent for use with KappTec™ and KappZapp7™ solders, displaying excellent wetting properties.

KappZipp™ Flux: Self-Cleaning Soldering Paste

KappZipp Flux is a self-cleaning, non-acid, petrolatum-based soldering paste flux containing Zinc Chloride. It is designed for use on most common metals except Aluminum and Magnesium with an active temperature range of 200-600°F (95-315°C). The petrolatum helps protect the solder joint against corrosive attack while the past form insures that the flux stays in place until you are ready to solder.

 

 

Let Us Help You Find your Tailored Solution. Act Now & Request A Quote.

REQUEST A QUOTE

CONTACT US

For any questions, please fill out the form below and a Kapp representative will contact you shortly.

line