WARNING! PROTECT YOURSELF AND OTHERS!
READ AND UNDERSTAND THIS INFORMATION!

Please see the MSDS for each Kapp Alloy product formulation for specific cautions and hazards. The following general cautions are designed to assist you in safely selecting and using Kapp Alloy products.

• PLANNING AHEAD CAN GREATLY IMPROVE YOUR SOLDER PROCESS, RESULTS AND SAFETY.
• FUMES AND GASES from solder and flux can be hazardous to your health.
• FLAMES AND ARC RAYS can injure eyes and burn skin.
• ELECTRIC SHOCK CAN KILL.
• Before use, read and understand the manufacturer's instructions, Material Safety Data Sheets (MSDS), and your employer's safety practices.
• Keep your head out of the fumes.
• Use enough ventilation, exhaust at the arc, or both, to keep fumes and gases from your breathing zone and general area.
• Wear appropriate eye, ear and body protection.
• Do not touch live electrical parts.
• See American National Standard Z49.1, Safety in Welding, Cutting and Allied Processes, published by the American Welding Society, 550 N.W. LeJeune Road, Miami,Florida 33126 for additional guidelines.
• OSHA Safety and Health Standards, available from the U.S. Government Printing Office, Washington DC 20402 list additional precautions.
• WARNING: Certain soldering products may contain cadmium and/or lead, which are listed by OSHA, NTP or IARC as being carcinogens or potential carcinogens. Use of these products may expose you or others to fumes and gases at levels exceeding those established by the American Conference of Governmental Industrial Hygienists (ACGIH) or the Occupational Safety and Health Administration (OSHA). Before use, read and understand the Material Safety Data Sheet (MSDS) for these and all Kapp Alloy products.
• The state of California requires certain products to carry additional warnings, which appear on the product packaging and Material Safety Data Sheets (MSDS).

STATEMENT OF LIABILITY - DISCLAIMER
The sole purpose of this web site is to provide information about Kapp Alloy and Wire, Inc., its products and its services. The information contained herein has been compiled in good faith by the Company; however, no representation is made as to the completeness or accuracy of the information presented. Information may be incomplete, contain errors or be outdated. Kapp Alloy and Wire, Inc. reserves the right to make any changes, additions or deletions to this site at any time. Any suggestion of product applications or results is given without representation or warranty, either expressed or implied. Without exception or limitation, there are no warranties of merchantability or of fitness for particular purpose or application.

The user must fully evaluate every process and application in all aspects, including suitability, compliance with applicable law and non-infringement of the rights of others. Kapp Alloy and Wire, Inc. and its affiliates shall have no liability in respect thereof.